Skip to main content
STMicroelectronics M24C01-WDW6TP — Memory (DRAM / SRAM / Flash / EEPROM)

M24C01-WDW6TP STMicroelectronics 1Kbit I²C EEPROM, 8-TSSOP

MPNM24C01-WDW6TP
NRND

STMicroelectronics M24C01 series EEPROM, 1Kbit, I²C, 400 kHz, 2.5-5.5 V, 8-TSSOP (4.40 mm width), -40 to 85 °C, Tape & Reel.

$0.1800Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

M24C01-WDW6TP specifications
ParameterValue
Memory typeNon-Volatile
MountingSurface Mount
Supply voltage2.5V ~ 5.5V
Clock frequency400 kHz
Memory interfaceI²C
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR) Cut Tape (CT)
TechnologyEEPROM
Access time900 ns
Memory size1Kbit
Memory formatEEPROM
Case8-TSSOP (0.173\", 4.40mm Width)
Memory organization128 x 8
Write cycle time - word, page5ms

Product details

NRND — planning for last-time-buy or alternative

STMicroelectronics lists the M24C01-WDW6TP as NRND (Not Recommended for New Designs). This means the part remains available for existing production but is not intended for new design-ins — the manufacturer may issue an end-of-life notice without a long last-time-buy window.

8-TSSOP package — board-fit and integration

The 0.65 mm lead pitch and standard footprint mean it drops into the same PCB land pattern as other industry-standard 8-pin serial EEPROMs in this package.

900 ns access, 5 ms page write — timing for the bus

The 400 kHz clock rate is the standard fast-mode I²C speed; the device acknowledges each byte within the same clock frame, so no extra wait states are inserted by the memory.

Frequently asked questions

What is the M24C01-WDW6TP used for?

It is a 1Kbit I²C EEPROM used for storing configuration parameters, calibration data, or small lookup tables in embedded systems that need non-volatile memory with byte-level write capability.