Skip to main content
Log in
STMicroelectronics IPS1025HTR-32 — Power Management (PMIC / Gate Driver)

IPS1025HTR-32 High-Side Switch – STMicroelectronics

MPNIPS1025HTR-32
Active

STMicroelectronics IPS1025HTR-32, single-channel high-side switch, 12 mOhm typical Rds(on), 5A max output, 8V to 60V supply range, PowerSSO-24 package, -40°C to 150°C operating temperature.

$6.6200Ref. price · indicative, final on quote
STMicroelectronics IPS1025HTR-32 datasheet (PDF)
Packaging24-PowerBSOP (0.295", 7.50mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

IPS1025HTR-32 specifications
ParameterValue
Input typeNon-Inverting
Output typeN-Channel
TypeGeneral Purpose
MountingSurface Mount
Voltage - supply (Vcc (Vdd))8V ~ 60V
Output current5A
I/O channels1
InterfaceLogic
Operating temperature-40°C~150°C
PackageTape & Reel (TR); Cut Tape (CT)
Rds on12mOhm
Case24-PowerBSOP (0.295\", 7.50mm Width)
Fault protectionCurrent Limiting (Adjustable), Open Load Detect, Over Temperature, Reverse Current, UVLO
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

Single-channel high-side switch for industrial loads

The IPS1025HTR-32 is a single-channel high-side switch from STMicroelectronics, rated for 5A continuous output and a supply range of 8V to 60V. Typical Rds(on) is 12 mOhm, but that figure is measured at 25°C — at a 125°C junction temperature you can expect it to roughly double, so budget the thermal margin accordingly. Built-in fault protection covers current limiting (adjustable), open load detection, over-temperature shutdown, reverse current blocking, and undervoltage lockout. That set of protections means the switch can handle a shorted load or a stalled motor without external supervision — the device self-limits and latches off if the die temperature exceeds the threshold.

Thermal and package considerations for the layout

The logic-level input is non-inverting and compatible with 3.3V or 5V MCU outputs — no level shifter needed.

Active production — sourcing and lifecycle status

Frequently asked questions

What is the Rds(on) of the IPS1025HTR-32 at operating temperature?

The datasheet lists 12 mOhm typical at 25°C. At a 125°C junction temperature, expect the on-resistance to approximately double — the exact multiplier is in the normalised curve in the datasheet. Always derate using the hot Rds(on) for loss and thermal calculations.

Is the IPS1025HTR-32 a high-side or low-side switch?

It is a high-side switch — the output is an N-channel MOSFET that connects the load to the supply rail, with the load returning to ground. The input-to-output ratio is 1:1.