Siemens A6X30138616 Twin Illuminated Pushbutton
A6X30138616 Parameter Overview
| Parameter | Value |
|---|---|
| Compatible Series | Siemens, 22mm |
| Actuator Type | Pushbutton, Oval (Dual) |
| Illumination | Illuminated |
| Panel Cutout | 22.3mm (Round) |
| Series | 3SU1 |
| Requires | Contact Block(s), Illumination Source |
| Encapsulation | Box |
| RoHS | ROHS3 Compliant |
| Product Status | Active |
A6X30138616 Configuration Requirements
Illumination Source Integration
This body is listed as Illuminated and explicitly requires an illumination source in addition to contact block(s). Panel builders selecting this body must confirm lamp module compatibility with the Siemens 3SU1 series illumination ecosystem. The dual oval actuator provides two independent pushbutton positions, each requiring separate contact block attachment.
Contact Block Compatibility
The body requires Contact Block(s) but does not include them. Every operator position in a configured assembly needs a matching contact block. The 22.3mm round panel cutout is standard for 22mm Siemens industrial controls; verify that selected contact blocks are rated for the intended circuit voltage and current before finalizing assembly.
Engineering Verification Checklist
- Confirm illumination source type (LED or incandescent) matches circuit design
- Verify contact block voltage and current ratings against load requirements
- Check dual pushbutton actuator travel and mounting depth for space constraints
- Validate panel cutout diameter matches 22.3mm specification before machining
- Ensure illumination source polarity matches driver circuit wiring
- Review RoHS3 compliance requirement for target market regulations
- Confirm that selected contact blocks are approved for the 3SU1 series
- Verify two separate contact blocks are ordered (one per pushbutton position)
- Check environmental rating compatibility if used outside standard industrial enclosure