24V DIN Rail Supply for SITOP 6EP1 Panel Builds
The 6EP13341LB00 drops into existing SITOP 6EP1 cabinet layouts without re-drilling or re-routing conductors.
On-page parameter snapshot
0mm × 70.0mm × 125.0mm
- Mounting: TS35 DIN rail
- IP rating: IP20
- Certifications: CB, CE, CSA, cUL, cULus, UL (60950-1 / UL 508)
- ROHS3 Compliant, REACH Unaffected, ECCN EAR99
Application fit for SITOP cabinet integrators
Tech-Savvy Sarah will notice this unit shares the single-output, adjustable-output architecture of the wider 6EP1 family. The universal-input design eliminates the dual-pole voltage selector switch found on some legacy SITOP bricks — fewer moving parts means fewer field callbacks. Input range 93–132 VAC handles North American branch circuits; 187–264 VAC covers single-phase international feeds without a step-down transformer.
When to pick the 6EP13341LB00 over the 6EP13343BA10
Both deliver 240W at 24V, 10A. The 6EP13341LB00 runs on single-phase mains only (93–132 or 187–264 VAC). The 6EP13343BA10 adds a 176–550 VAC two-phase input window — useful if your panel feed is 3-wire without neutral.
Procurement and replacement notes
One unit is available via RFQ confirmation. Volume pricing tiers kick in at 10, 25, and 50 units. If you're quoting a panel-build run of 10–100 units, factor in lead time verification — current evidence does not include quoted lead time for this MPN.
Design engineer's notes (limits and rails)
When siemens 6EP13341LB00 (AC/DC DIN RAIL SUPPLY 24V 240W); category path: Power Supplies - External/Internal (Off-Board) > Industrial, DIN Rail Power Supplies; confirmed specs: series: 6EP1; Package: Bulk; Product Status: Active is on the short list, reconcile every printed parameter (voltage tiers, current capability, package) with the schematic net names and protection devices you already committed.
Field notes for cabinet wiring checks
Field work should confirm grounding, shielding, and bus coordination with adjacent racks—especially when the raw record shows tight voltage or current margins.
Selection notes: wiring footprint and series
If procurement proposes a look-alike, require a side-by-side on the parameters that actually load the bus—channels, isolation, inrush, and protection class—not marketing series names alone.