Siemens G120X IP20 380..480V 160KW FSG (6SL32303YE501CB0)
Cabinet Placement and Key Ratings
This G120X power module is intended for chassis mounting within IP20-rated enclosures or motor control cabinets. The unit operates over an input voltage range of 380–480 V AC and delivers a continuous output current of 408 A to drive AC motors rated up to 160 kW.
| Parameter | Specification |
|---|---|
| Input Voltage | 380–480 V AC |
| Output Current | 408 A |
| Motor Power Rating | 160 kW |
| Motor Type | AC Motor |
| Mounting | Chassis Mount |
| Enclosure | IP20 |
| Operating Temperature | 20°C to 45°C |
| Series | SINAMICS G120X |
| RoHS Status | ROHS3 Compliant |
Family Comparison: Suffix Variants
The 6SL32303YE501CB0 and its alternates are chassis-mountable SINAMICS G120X drive modules sharing identical core ratings: 380–480 V AC input, 408 A output, and 160 kW motor capacity. The MPN suffix distinguishes filter class, frame size designation, and firmware configuration.
| MPN | Suffix Pattern | Series | Similarity |
|---|---|---|---|
| 6SL32303YE501CB0 | CB0 | SINAMICS | 1.0 |
| 6SL32303YE501CF0 | CF0 | SINAMICS | 1.0 |
| 6SL32303YE501CP0 | CP0 | SINAMICS G120X | 1.0 |
| 6SL32303YE501AB0 | AB0 | SINAMICS | 1.0 |
| 6SL32303YE501AF0 | AF0 | SINAMICS | 1.0 |
| 6SL32303YE501AP0 | AP0 | SINAMICS | 1.0 |
| 6SL32303YE500CB0 | CB0 (lower suffix) | SINAMICS | 1.0 |
| 6SL32303YE500AB0 | AB0 (lower suffix) | SINAMICS G120X | 1.0 |
| 6SL32303YE500CP0 | CP0 (lower suffix) | SINAMICS G120X | 1.0 |
The CB0 and AB0 suffix groups represent differing firmware configurations within the same frame size. The lower-suffix variants (YE500...) carry equivalent electrical ratings but may correspond to earlier hardware revisions. Readers must confirm compatibility with their specific SINAMICS G120X control unit before procurement.
Engineering Verification Checklist
- Verify chassis cutout and mounting hole pattern matches the enclosure or subpanel layout
- Confirm input voltage is within 380–480 V AC three-phase range before applying power
- Validate output current rating against motor nameplate and expected load profile
- Check ambient temperature in enclosure stays within 20–45°C operating window
- Confirm IP20 rating is appropriate for the installation environment (indoor, protected)
- Verify firmware revision matches the existing G120X control unit if mixing modules
- Confirm RoHS3 compliance requirement is met for the target installation region
- Inspect box packaging for transit damage on receipt before mounting
- Review motor protection settings in the drive configuration for 408 A output