Siemens SINAMICS G120X G120X IP20 380..480V 1.5KW FSA
Key specifications 6SL32203YE140UP0
| Parameter | Value |
|---|---|
| Rated output current | 4.8 A |
| Input voltage range | 380–480 V AC |
| Rated motor power | 1.5 kW |
| Frame size | FSA |
| Enclosure | IP20 / Box |
| Mounting | Chassis mount |
| Operating temperature | 20°C – 45°C |
| Series | SINAMICS G120X |
| Product status | Active |
| RoHS | ROHS3 Compliant |
| For use with | G120X Series |
The SINAMICS G120X series targets HVAC centrifugal pump and fan drives. The FSA frame size constrains the thermal derating window to the stated 45 °C ceiling; no liquidcooling or IP54/NEMA 12 options appear in this spec block.
The suffix letter positions (UP0 vs UF0, UB0, AP0, AB0, AF0) encode firmware variant, integrated filter, and optional built-in brake chopper. MPNs 6SL32203YE141xx shift one digit further right, potentially indicating a higher firmware revision or minor assembly revision within the same power rating. All listed variants share 4.8 A output, 1.5 kW, and 380–480 V across the family.
Engineering verification checklist
- Confirm input voltage matches system nominal (380, 400, 415, 440, or 480 V AC, three-phase).
- Verify motor nameplate full-load current ≤ 4.8 A and power ≤ 1.5 kW at the target operating speed range.
- Check cabinet thermal model: 45 °C maximum ambient is specified; verify airflow or ventilation is sufficient for FSA frame.
- Validate that the enclosure rating (IP20) is acceptable for the installation environment; additional filtering or covers may be required in dusty locations.
- Confirm the correct firmware variant suffix for the target application (e.g., integrated EMC filter, brake chopper, or USS/Modbus vs CANopen vs PROFINET communication).
- Verify that the control interface (digital/analog I/O or fieldbus) aligns with the PLC or building management system.
- Review motor protection settings (overload, undervoltage, phase loss) against the driven load characteristics.
- Check that the chosen MPN variant matches the required certifications for the target region (e.g., UL, CE markings for the specific suffix).
- Confirm mechanical mounting dimensions are compatible with the existing or planned chassis/panel cutout for FSA frame.