Siemens G120X Variable Frequency Drive Module
Specifications — 6SL32203YE240UF0
| Parameter | Value |
|---|---|
| Output Current | 24 A |
| Input Voltage | 380–480 V AC |
| Rated Power | 7.5 kW |
| Motor Type | AC Motor |
| Series | SINAMICS G120X |
| Protection Class | IP20 |
| Mounting | Chassis Mount |
| Encapsulation | Box |
| Operating Temperature | 20°C–45°C |
| Product Status | Active |
| RoHS Compliance | ROHS3 Compliant |
The SINAMICS G120X series targets HVAC and pump applications. The 24 A output rating assumes a standard 400 V three-phase supply; actual current draw varies with load point and switching frequency. Chassis mounting requires adequate ventilation clearance per the SINAMICS G120X planning instructions.
Alternate Suffix Comparison
| Spec | 6SL32203YE240UF0 | 6SL32203YE240UP0 | 6SL32203YE240UB0 | 6SL32203YE240AF0 |
|---|---|---|---|---|
| Current | 24 A | 24 A | 24 A | 24 A |
| Voltage | 380–480 V | 380–480 V | 380–480 V | 380–480 V |
| Power | 7.5 kW | 7.5 kW | 7.5 kW | 7.5 kW |
| Series | SINAMICS | SINAMICS G120X | SINAMICS | SINAMICS G120X |
| Operating Temp | 20°C–45°C | 20°C–45°C | 20°C–45°C | 20°C–45°C |
| Mounting | Chassis | Chassis | Chassis | Chassis |
| Similarity | — | 1.00 | 1.00 | 1.00 |
Readers must qualify each alternative against their specific application requirements independently.
- 6SL32203YE240UP0: Same hardware spec; suffix indicates UP0 vs UF0. Both series designations appear in the record.
- 6SL32203YE240UB0: Same hardware spec; UB0 differs in the trailing suffix from the seed UF0.
- 6SL32203YE240AF0: Same hardware spec; series field variant SINAMICS G120X.
All nine alternates share identical electrical ratings, thermal limits, and chassis-mount form factor. Differences are confined to suffix codes and whether the series field reads "SINAMICS" or "SINAMICS G120X".
Engineering Verification Checklist
- Confirm 24 A output matches motor nameplate full-load current with derating for elevated ambient temperature
- Verify enclosure IP20 rating suits the installation environment (no direct spray or condensation exposure)
- Check chassis-mount dimensions and ventilation clearance against cabinet layout
- Validate that the 380–480 V supply matches local grid nominal voltage
- Confirm 7.5 kW rating is adequate for motor starting current and overload margin requirements
- Verify compatibility with the SINAMICS G120X control unit version planned for use
- Cross-reference suffix code against procurement specification to ensure firmware or configuration compatibility