Siemens G120X 11 kW Drive Module (500–690 V)
Ratings — 6SL32302YH261AB0
| Parameter | Value |
|---|---|
| Input Voltage | 500–690 V AC (three-phase) |
| Rated Output Current | 19 A |
| Mechanical Power | 11 kW |
| Motor Type | AC Motor |
| Mounting | Chassis Mount |
| Enclosure | IP20, Box |
| Operating Temperature | 20°C ~ 45°C |
| Series | SINAMICS G120X |
| Certification | ROHS3 Compliant |
| Product Status | Active |
The SINAMICS G120X platform targets HVAC and pump applications in the 500–690 V band, a range common in industrial mid-voltage installs. The chassis-mount form factor requires field assembly into an enclosure providing IP20 or better; Siemens quotes the operating window as 20–45 °C ambient.
Alternate Suffix Comparison
Reader must qualify all listed alternates independently; similarity scores reflect catalog-parameter proximity only, not functional equivalence.
| MPN | Voltage | Power | Current | Motor Type | Temp | Similarity |
|---|---|---|---|---|---|---|
| 6SL32302YH261AB0 | 500–690 V | 11 kW | 19 A | AC Motor | 20°C~45°C | — |
| 6SL32302YH261AP0 | 500–690 V | 11 kW | 19 A | AC Motor | 20°C~45°C | 1.0 |
| 6SL32302YH261AF0 | 500–690 V | 11 kW | 19 A | AC Motor | 20°C~45°C | 1.0 |
| 6SL32302YH261UB0 | 500–690 V | 11 kW | 19 A | AC Motor | 20°C~45°C | 1.0 |
| 6SL32302YH261UF0 | 500–690 V | 11 kW | 19 A | AC Motor | 20°C~45°C | 1.0 |
| 6SL32302YH261UP0 | 500–690 V | 11 kW | 19 A | AC Motor | 20°C~45°C | 1.0 |
| 6SL32302YH260AB0 | 500–690 V | 11 kW | 19 A | AC Motor | 20°C~45°C | 1.0 |
| 6SL32302YH260AF0 | 500–690 V | 11 kW | 19 A | AC Motor | 20°C~45°C | 1.0 |
| 6SL32302YH260UB0 | 500–690 V | 11 kW | 19 A | AC Motor | 20°C~45°C | 1.0 |
All nine share identical electrical ratings: 500–690 V, 19 A, 11 kW, AC Motor, chassis mount, IP20 box, 20–45 °C.
Why similar: AB0, AP0, AF0 share the same 6SL32302YH261 base, differing only in final-suffix letter (P, F vs B); the 6SL32302YH260 variants carry the prior base number and may represent an earlier firmware release or market-specific variant. The "C" vs "U" split in the title (FSD C / FSD U) indicates a firmware/configuration family distinction common to SINAMICS ordering codes, not an electrical rating change.
Engineering Verification Checklist
- Confirm supply voltage range is three-phase 500–690 V at the installation point
- Verify load current does not exceed 19 A continuous at the target motor
- Confirm ambient temperature will stay within 20–45 °C; derate if cabinet airflow is marginal
- Verify chassis mounting dimensions and Din-rail or panel-cutout requirements from Siemens G120X documentation
- Confirm enclosure provides IP20 or better per IEC 60529 for the installation environment
- Verify firmware variant (C vs U family) matches the application profile and any required fieldbus or safety function
- Confirm motor nameplate voltage and current are compatible with drive parameterization (V/f or sensorless vector)
- Verify RoHS3 compliance requirement is met for the end market
- Check that the drive is configured with appropriate motor data and protection settings before energization