The Renesas RV1S9160ACCSP-100V#SC0 is a single-channel, high-speed digital optocoupler with a CMOS output stage, rated for 15 Mbps data throughput and 3750 Vrms isolation. It targets galvanic isolation in industrial fieldbus interfaces, motor drive feedback paths, and isolated power-supply control loops where signal integrity across the barrier matters. The 50 kV/µs minimum common-mode transient immunity handles the fast switching edges in IGBT/SiC gate-drive circuits without false triggering.
Timing budget and drive current
Propagation delay is 60 ns max in both directions, which sets the timing closure floor for a 15 Mbps NRZ data stream — about 66 ns per bit period, so the delay consumes roughly 90% of the bit window. That leaves 6 ns of margin for cable skew and connector jitter; plan the bus timing accordingly.
Supply range and input drive
The LED forward voltage is 1.55 V typical, and the maximum forward current is 6 mA — a 330 Ω series resistor from a 3.3 V logic output biases it correctly. At 6 mA LED drive, the 60 ns propagation delay holds across temperature.
Package and footprint
Housed in a 5-lead SOIC-6 body (0.173" width, 4.40 mm) with a 5-SO supplier device code. The 6-pin SOIC footprint with one pin omitted is standard for 5-lead optocouplers; the pinout matches the Renesas RV1S92xx series, so a board laid out for the RV1S9262 will accept this part without layout changes.
Lifecycle and compliance
Renesas provides the standard compliance documentation package including RoHS and REACH declarations.