Transient suppression on a protected rail
The 1.5SMCJ7.0CA_R1_00001 is a unidirectional Zener-based TVS diode — it clamps positive transients on a single polarity rail, clamping the protected node to 12 V maximum when the peak pulse current hits 125 A (10/1000 µs waveform). Reverse standoff is 7 V typ, meaning the TVS sits invisible on the line during normal operation; the 7.78 V minimum breakdown threshold is where it begins conducting during a surge event. Rated for a 1.5 kW peak pulse at that waveform, the part protects downstream circuitry from voltage spikes that would otherwise exceed the clamp ceiling — the downstream bus sees 12 V, not the full surge magnitude.
SMC package and thermal margin
The SMC (DO-214AB) package is the mid-range SMC footprint — compatible with the standard pad layout for this body size, but check the MSL rating and bake schedule before reflow if the part has been on a reel longer than its floor life allows. Junction temperature range runs to 150 °C, so there is thermal headroom in the transient — the clamping event is short-duration by definition, and the package thermal impedance determines whether repeated pulses stay within that 150 °C ceiling.
Active — quoted to order
Quoted to order through independent distribution against an RFQ; availability and lead time confirmed at quote time.