Skip to main content
Log in
Panjit International Inc. 1.5SMCJ10A_R1_00001 — Circuit Protection

Panjit 1.5SMCJ10A_R1_00001 TVS Diode, 10V standoff

MPN1.5SMCJ10A_R1_00001
Active

Panjit International Inc. 1.5SMCJ series unidirectional TVS diode, 1.5 kW peak pulse power, 10V reverse standoff, 17V clamping, SMC (DO-214AB) surface-mount package.

$0.6500Ref. price · indicative, final on quote
Panjit International Inc. 1.5SMCJ10A_R1_00001 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

1.5SMCJ10A_R1_00001 specifications
ParameterValue
TypeZener
Series1.5SMCJ
MountingSurface Mount
Voltage - breakdown11.1V
Voltage - clamping (Max) @ ipp17V
Voltage - reverse standoff10V
Current - peak pulse (10/1000μs)88.2A
Power - peak pulse1500W (1.5kW)
Power line protectionNo
Operating temperature-55°C~150°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT)
ApplicationsGeneral Purpose
CaseDO-214AB, SMC
Unidirectional channels1

Product details

Transient suppression at 10 V bus — what the clamping spec means

The 1.5SMCJ10A_R1_00001: The 1.5 kW peak pulse power rating sets the energy absorption ceiling for a single transient event — above that energy the junction overheats and the device can fail short, which is the failure mode to protect against in downstream circuit design.

Temperature grade and mounting form factor

Surface-mount SMC (DO-214AB) package is the industry standard footprint for 1.5 kW unidirectional TVS diodes — the land pattern is compatible across the 1.5SMCJ series family, so the board pad set carries over if a different standoff voltage is selected.

Series positioning and single-source sourcing note

The 1.5SMCJ series is a common unidirectional TVS family used across industrial control, communications, and consumer electronics; multiple manufacturers offer pin-compatible parts in the same SMC footprint, which matters if BOM second-source hedge is a concern.

Frequently asked questions

What standoff voltage does the 1.5SMCJ10A clamp at?

The reverse standoff is 10 V typical; the maximum clamping voltage at peak pulse current is 17 V — that 7 V differential is the let-through stress the protected load sees during a surge event.

Is there a pin-compatible alternative in the 1.5SMCJ series?

The SMC (DO-214AB) footprint is industry-standard across the 1.5SMCJ family — parts with different standoff voltages share the same land pattern. A different Panjit 1.5SMCJ variant with the desired standoff voltage is pin-compatible on the same board layout; confirm the clamping voltage matches the protected rail before substituting.