1296H x 976V CMOS imager with on-chip processor
The onsemi MT9M114EBLSTCZ-CR is a CMOS with Processor image sensor — a single-chip solution that integrates the pixel array and image signal processing onto one die, eliminating the need for a separate ISP in the camera module. The 1296H x 976V active pixel array at 1.9µm x 1.9µm frame size delivers 1.2 MP resolution, suitable for embedded vision applications where board space and BOM count are constrained. Rated for 120 fps, this sensor supports high-speed capture for motion analysis or fast-moving object tracking without rolling-shutter artifacts at lower frame rates.
1.7V supply, -30°C to 70°C junction temperature
Operating from a single 1.7V supply rail, the MT9M114EBLSTCZ-CR fits into low-voltage camera designs where the core logic already runs at 1.8V or 1.2V — the 1.7V minimum means a standard 1.8V rail with tolerance covers the requirement without a dedicated regulator. The -30°C to 70°C junction temperature range covers industrial and outdoor surveillance applications, though the 70°C TJ ceiling means the sensor should not be placed near heat-generating components on the same flex or rigid board without thermal analysis.
onsemi supplies this part in Tray packaging — the standard delivery format for volume camera module assembly, compatible with pick-and-place lines that handle tray-fed components.