Skip to main content
onsemi MOCD223R2VM — Optoisolators
onsemi

onsemi MOCD223R2VM Optoisolator, 2-Ch Darlington, 8-SOIC

MPNMOCD223R2VM
End of Life

onsemi MOCD223R2VM dual-channel Darlington output optoisolator, 2500Vrms isolation, 150mA output per channel, 500% CTR min at 1mA, 8-SOIC surface-mount package, Tape & Reel or Cut Tape.

$1.65Ref. price · indicative, final on quote
MOCD223R2VM datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockIn Stock (18)
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MOCD223R2VM Technical Specifications
ParameterValue
Input typeDC
Output typeDarlington
Mounting typeSurface Mount
Voltage - isolation2500Vrms
Voltage - output30V
Voltage - forward (Vf)1.25V
Current - output (Channel)150mA
Current transfer ratio500% @ 1mA
Current - DC forward (If)60 mA
Operating temperature-40°C ~ 100°C
PackageTape & Reel (TR); Cut Tape (CT)
Case8-SOIC (0.154\", 3.90mm Width)
Number of channels2
Vce saturation1V
Rise (Fall time)8µs, 110µs
Turn on (Turn off time)10µs, 125µs

Product details

Dual Darlington optoisolator in SOIC-8

The onsemi MOCD223R2VM packs two Darlington-output optocouplers into a single 8-SOIC package, each channel rated for 150 mA continuous output at up to 30 V. The minimum current transfer ratio of 500% at 1 mA forward current means a low-side microcontroller pin can switch a relay or solenoid without an external driver transistor — the Darlington gain does the heavy lifting.

Switching speed and temperature range

Turn-on time is 10 µs typical, turn-off 125 µs typical — the Darlington output trades speed for gain, so this part suits DC load switching at a few hundred hertz rather than high-speed data isolation. Rise and fall times (8 µs and 110 µs typical) confirm the same bias.

Package and surface-mount assembly

The supplier device package is 8-SOIC — no exposed pad, so standard reflow profiles for small-outline ICs apply.