Skip to main content
Log in
onsemi MOC3052TVM — Optoisolators

MOC3052TVM onsemi Optoisolator Triac Driver 6-DIP Tube

MPNMOC3052TVM
Active

onsemi MOC3052TVM, 1-channel non-zero-cross triac driver optoisolator, 4170 Vrms isolation, 600 V off-state, 1 kV/µs dV/dt, 6-DIP through-hole package, tube

$1.1000Ref. price · indicative, final on quote
onsemi MOC3052TVM datasheet (PDF)
Packaging6-DIP (0.400", 10.16mm)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MOC3052TVM specifications
ParameterValue
Output typeTriac
MountingThrough Hole
Voltage - isolation4170Vrms
Voltage - off state600 V
Voltage - forward (Vf)1.18V
Current - hold220µA (Typ)
Current - DC forward (If)60 mA
Current - LED trigger (Ift)10mA
Operating temperature-40°C~85°C
Approval agencyUR, VDE
PackageTube
Case6-DIP (0.400\", 10.16mm)
Channels1
Static dV (dt)1kV/µs
Zero crossing circuitNo

Product details

Triac driver for 240/480 VAC load control

The MOC3052TVM is an onsemi optoisolator with a triac output rated for 600 V off-state voltage and 4170 Vrms isolation, packaged in a 6-DIP through-hole body. It drives medium-voltage AC loads — think 240 VAC or 480 VAC solenoids, fans, or heaters — directly from a logic-level LED input. Because it lacks a zero-cross circuit, the output triac can fire at any phase angle, which makes this part suitable for phase-angle dimming or soft-start applications where you need to control power delivery across the full AC cycle.

Parametric fit for industrial switching

The minimum static dV/dt of 1 kV/µs gives the triac immunity to fast voltage transients — a real concern when switching inductive loads or operating on a noisy mains line. The typical hold current of 220 µA sets the minimum load current needed to keep the triac latched; below that, the output may drop out at the next zero crossing. The forward current is rated up to 60 mA, so there is margin for high-temperature derating.

Frequently asked questions

Is MOC3052TVM equivalent to MOC3052 or MOC3053?

The base product number is MOC305. The MOC3052TVM is a specific variant with tube packaging and a 6-DIP through-hole package. The MOC3052 and MOC3053 differ in trigger current and dV/dt ratings; check the respective datasheets for exact parametric differences. For a pin-compatible alternative within the same family, the MOC3052M (surface-mount) or MOC3052SR2M (tape-and-reel) share the same die but different packaging.

Can MOC3052TVM be used for 600 V AC triac switching directly?

The 600 V off-state rating means the output triac can block up to 600 V peak when off, which covers 480 VAC RMS (peak ~679 V) with some margin. For 600 VAC RMS (peak ~849 V), the off-state voltage is insufficient — you would need a higher-rated part. Always derate for line transients and inductive kickback.