Skip to main content
onsemi MC74ACT153DG — Sensors & Transducers
onsemi

onsemi MC74ACT153DG 74ACT Multiplexer, 2 x 4:1, 16-SOIC

MPNMC74ACT153DG
End of Life

onsemi 74ACT series Multiplexer, MC74ACT153DG, 2 x 4:1 circuit, single 4.5V to 5.5V supply, 24mA output drive, 16-SOIC surface mount package, -40 to 85°C operating temperature.

$0.82Ref. price · indicative, final on quote
MC74ACT153DG datasheet
Packaging16-SOIC (0.154", 3.90mm Width)
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MC74ACT153DG Technical Specifications
ParameterValue
TypeMultiplexer
Series74ACT
Mounting typeSurface Mount
Voltage4.5V ~ 5.5V
Voltage supply sourceSingle Supply
Current - output high, low24mA, 24mA
Operating temperature-40°C ~ 85°C
Circuit2 x 4:1
PackageTube
Case16-SOIC (0.154\", 3.90mm Width)
Independent circuits1

Product details

Dual 4:1 multiplexer in a 16-SOIC footprint

The MC74ACT153DG: It selects one of four data inputs per multiplexer based on a common two-bit address, routing the chosen signal to the corresponding output. Operating from a single 4.5V to 5.5V supply, it is a direct fit for 5V TTL/CMOS logic systems. The 16-SOIC footprint (Supplier Device Package 16-SOIC) is a standard narrow-body SOIC, which means the PCB land pattern is well-documented and shared across many logic and interface parts — no custom footprint required.

Output drive and temperature range

The 74ACT family's 5V swing and 24mA drive are well matched to the noise margins of a 5V backplane or a sensor bus running at 3.3V with level translation.

Frequently asked questions

What is the MC74ACT153DG's circuit configuration?

It is a dual 4:1 multiplexer (2 x 4:1), meaning two independent multiplexers each select one of four data inputs based on a common two-bit address. The part has one independent circuit (Independent Circuits: 1) — the two muxes share the same select lines but have separate enables and outputs.