Active production — no obsolescence risk for BOM planning
The FODM217AR2: ROHS3 compliance is confirmed, so the part meets the latest EU restriction requirements without exemption expiry concerns.
The 1-channel transistor output with a maximum collector-emitter voltage of 80V and continuous output current of 50mA per channel handles standard logic-level signals (5V, 3.3V) and small relay or LED loads directly.
Current transfer ratio — 80% to 160% at 5mA forward current
The CTR is specified as 80% minimum and 160% maximum at If=5mA — a tight bin that guarantees the output transistor saturates with a standard 5mA LED drive, even at the low end of the temperature range. This makes the part predictable across reel-to-reel variation.
Switching speed and temperature range
Rise and fall times are 2µs and 3µs typical, with turn-on and turn-off times both 3µs typical — adequate for switching frequencies up to about 100kHz and for isolating slow serial buses (UART, I²C at 100kHz) or PWM signals in motor drives.
The supplier device package is designated 4-SOP, which is the same mechanical outline. Available in both Tape & Reel (for automated pick-and-place) and Cut Tape (for prototyping and small runs), giving flexibility in procurement quantity.