The onsemi CNY17F4VM is a single-channel optoisolator with a DC input and a phototransistor output, housed in a 6-DIP (0.300", 7.62mm) through-hole package supplied in bulk. The output transistor can switch up to 70V and sink 50mA continuous, with a maximum Vce saturation of 400mV at rated current — adequate for driving a PLC input or a low-power relay coil directly. Typical switching speeds are 2µs turn-on and 3µs turn-off (with 4µs rise and 3.5µs fall max), placing this part in the medium-speed class for 50/60Hz line isolation or slow digital signals. Operating temperature spans -40°C to 100°C, covering industrial enclosures and outdoor telecom cabinets without derating.
onsemi CNY17F4VM Optoisolator, 1-Ch DC, 4170Vrms, DIP-6
MPNCNY17F4VM
Active
onsemi CNY17F4VM Optoisolator, 1-Channel, DC Input, Transistor Output, 4170Vrms Isolation, 160-320% CTR, Through Hole, 6-DIP (0.300", 7.62mm), Bulk.
$1.0300Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Input type | DC |
| Output type | Transistor |
| Mounting | Through Hole |
| Voltage - isolation | 4170Vrms |
| Voltage - output | 70V |
| Voltage - forward (Vf) | 1.35V |
| Current - output (Channel) | 50mA |
| Current transfer ratio | 320% @ 10mA |
| Current - DC forward (If) | 60 mA |
| Operating temperature | -40°C~100°C |
| Package | Bulk |
| Case | 6-DIP (0.300\", 7.62mm) |
| Channels | 1 |
| Vce saturation | 400mV |
| Rise (Fall time) | 4µs, 3.5µs (Max) |
| Turn on (Turn off time) | 2µs, 3µs |