Skip to main content
NXP USA Inc. MKL46Z128VLH4 — Microcontrollers & Processors (MCU / MPU / DSP)

NXP MKL46Z128VLH4 Kinetis KL4 MCU, 48 MHz, 128 KB Flash, 64-LQFP

MPNMKL46Z128VLH4
Active

NXP Kinetis KL4 series, MKL46Z128VLH4, 32-bit ARM Cortex-M0+ MCU, 48 MHz, 128 KB Flash, 16 KB RAM, USB OTG, 50 I/O, 64-LQFP (10x10 mm), -40 to 105°C.

$9.9400Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MKL46Z128VLH4 specifications
ParameterValue
SeriesKinetis KL4
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.71V ~ 3.6V
Operating temperature-40°C~105°C(TA)
Speed48MHz
PackageTray
RAM size16K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, I²S, LVD, POR, PWM, WDT
ConnectivityI²C, LINbus, SPI, UART/USART, USB, USB OTG
Number of i (O)50
Core processorARM® Cortex®-M0+
Case64-LQFP
Data convertersA/D - 16bit; D/A - 12bit
Program memory size128KB (128K x 8)

Product details

48 MHz Cortex-M0+ — what the speed buys you

The MKL46Z128VLH4: The ARM Cortex-M0+ core runs at 48 MHz with 16 KB RAM.

Industrial temperature range — where it lives

Rated for -40°C to 105°C and 1.71 V to 3.6 V supply. Internal oscillator saves a crystal for non-critical timing.

Peripherals and connectivity — what's on the bus

This part packs USB OTG (host and device), I²C, SPI, UART/USART, and LINbus — enough for a USB-to-serial bridge, a small HMI with a touch controller, or a CAN gateway if you add an external CAN transceiver. The 16-bit ADC and 12-bit DAC cover analog sensor inputs and simple analog output loops. The 50 GPIOs in the 64-LQFP package give you room for a parallel LCD interface or a keypad matrix without multiplexing.

Lifecycle and sourcing — active, no LTB pressure

Frequently asked questions

What is the closest pin-compatible alternative to MKL46Z128VLH4?

The MKL46Z256VLH4 (256 KB Flash, same 64-LQFP package) is pin-compatible and offers double the program memory. Both share the same peripheral set and supply range, so a BOM swap requires only a firmware update.

What is MKL46Z128VLH4's listed speed?

The core runs at 48 MHz. That is the maximum clock for the Cortex-M0+ in this device; no overclocking headroom is specified.