NXP i.MX RT1010 series, MIMXRT1011DAE5A: 32-bit ARM Cortex-M7 single-core at 500MHz, 128KB SRAM, external program memory via EBI/EMI, 44 I/O, 15x12b ADC, USB2.0 OTG, I²C/SPI/UART, 3V–3.6V supply, 80-FQFP 12×12mm tray, 0°C–95°C TJ, Active ROHS3.
| Parameter | Value |
|---|---|
| Series | RT1010 |
| Mounting | Surface Mount |
| Oscillator type | External, Internal |
| Program memory type | External Program Memory |
| Voltage - supply (Vcc (Vdd)) | 3V ~ 3.6V |
| Operating temperature | 0°C~95°C(TJ) |
| Speed | 500MHz |
| Package | Tray |
| RAM size | 128K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Connectivity | EBI/EMI, I²C, SAI, SPDIF, SPI, UART/USART, USB2.0 OTG |
| Number of i (O) | 44 |
| Core processor | ARM® Cortex®-M7 |
| Case | 80-LQFP |
| Data converters | A/D 15x12b |
44 general-purpose I/O lines are available, alongside a 15-channel 12-bit ADC, USB 2.0 OTG with PHY, and serial interfaces covering I²C, SPI, UART, SAI (audio), and SPDIF. The EBI/EMI bus supports parallel NOR Flash, SRAM, or PSRAM; for smaller code footprints a QSPI Flash on the FlexSPI controller saves pins.
Yes, the MIMXRT1011DAE5A has no internal program memory — all code must be stored in an external SPI NOR Flash, parallel NOR Flash, or PSRAM accessed via the FlexSPI or EBI/EMI interface. The 128 KB SRAM on-chip is for data only.
The Cortex-M7 core runs at 500 MHz, making it one of the fastest MCU-class parts in a low-pin-count 80-FQFP package.
The pinout is defined in the NXP i.MX RT1010 datasheet. The 80-FQFP package includes dedicated pins for the EBI/EMI address and data bus, FlexSPI, USB D+/D-, ADC inputs, and the usual serial interface pins. Refer to the manufacturer's pin assignment table for the full mapping.