NXP LPC824M201JDH20J — ARM Cortex-M0+ MCU, 30MHz, 32KB Flash, 20-TSSOP
NXP LPC82x series 32-bit ARM Cortex-M0+ MCU, 30MHz, 32KB Flash, 8KB RAM, 5×12-bit ADC, 16 I/O, 1.8–3.6 V supply, -40°C to 105°C, 20-TSSOP (TR/CT).
- 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
- Date & lot codes on quoteStated per line before you commit; label photos on request.
- MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
- PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
Specifications
| Parameter | Value |
|---|---|
| Series | LPC82x |
| Mounting type | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C~105°C(TA) |
| Speed | 30MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| RAM size | 8K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Connectivity | I²C, SPI, UART/USART |
| Number of i (O) | 16 |
| Core processor | ARM® Cortex®-M0+ |
| Case | 20-TSSOP (0.173\", 4.40mm Width) |
| Data converters | A/D 5x12b |
| Program memory size | 32KB (32K x 8) |
Frequently asked questions
What package variants are available for ordering?
The part is offered in Tape & Reel (TR) for production volumes and Cut Tape (CT) for prototype and low-quantity orders — both share the same 20-TSSOP body and terminal finish.
Can I use the LPC824M201JDH20J as a drop-in replacement for an LPC812 design?
The 20-TSSOP 4.40mm body width matches the LPC812 package, but GPIO assignments on pins 13 through 15 differ between the two devices. A schematic review of those pins is required before treating it as a drop-in swap.
Does the LPC824M201JDH20J need an external supervisor IC for brown-out protection?
The part integrates on-chip brown-out detection and power-on reset. The exact release and threshold voltages are datasheet-level specifications not present in this ledger — verify against the NXP LPC824 datasheet for your supply rail and hold-off requirements.
How do I source this part and what documentation should I request?
Submit an RFQ specifying the exact order code, the required pack type (TR or CT), quantity, and request full traceability documentation plus ROHS3 CofC to confirm authenticity against secondary-market risk.