Skip to main content
Log in
NXP USA Inc. LPC812M101JDH20FP — Microcontrollers & Processors (MCU / MPU / DSP)

NXP LPC812M101JDH20FP ARM Cortex-M0+ MCU, 30MHz

MPNLPC812M101JDH20FP
Active

NXP LPC81xM series ARM Cortex-M0+ 32-bit single-core MCU, 30MHz, 16KB Flash, 4KB RAM, 18 I/O, I²C/SPI/UART, 1.8V–3.6V, -40°C to 105°C, 20-TSSOP, tube.

$2.4600Ref. price · indicative, final on quote
NXP USA Inc. LPC812M101JDH20FP datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LPC812M101JDH20FP specifications
ParameterValue
SeriesLPC81xM
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C~105°C(TA)
Speed30MHz
PackageTube
RAM size4K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityI²C, SPI, UART/USART
Number of i (O)18
Core processorARM® Cortex®-M0+
Case20-TSSOP (0.173\", 4.40mm Width)
Program memory size16KB (16K x 8)

Product details

The NXP LPC812M101JDH20FP is a 32-bit ARM Cortex-M0+ microcontroller from the LPC81xM series, running at 30 MHz with 16 KB Flash and 4 KB RAM. Typical applications include sensor nodes, simple motor control, and human-machine interface front-ends where a small footprint and low pin count are required.

At 30 MHz, the Cortex-M0+ core handles single-cycle GPIO toggling and polling-based serial communication. The 16 KB Flash and 4 KB RAM support a single-threaded state machine or a slim RTOS.

No successor or last-time-buy notice is indicated.

Frequently asked questions

What is the closest pin-compatible alternative to LPC812M101JDH20FP?

Within the LPC81xM series, other density options (e.g., 8 KB or 32 KB Flash variants) share the same 20-TSSOP pinout and peripheral set, allowing a drop-in swap to adjust memory without a board respin.

What is the operating temperature range and supply voltage for LPC812M101JDH20FP?

The LPC812M101JDH20FP operates from -40°C to 105°C and accepts a supply voltage of 1.8 V to 3.6 V.