NXP LPC81xM series 32-bit ARM Cortex-M0+ MCU, LPC812M101JDH16FP, 30MHz, 16KB Flash, 4K x 8 RAM, 14 I/O, I²C/SPI/UART, 1.8V-3.6V, -40 to 105°C, 16-TSSOP.
| Parameter | Value |
|---|---|
| Series | LPC81xM |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C ~ 105°C (TA) |
| Speed | 30MHz |
| Package | Tube |
| RAM size | 4K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Connectivity | I²C, SPI, UART/USART |
| Number of i (O) | 14 |
| Core processor | ARM® Cortex®-M0+ |
| Case | 16-TSSOP (0.173\", 4.40mm Width) |
| Program memory size | 16KB (16K x 8) |
At 30 MHz the Cortex-M0+ executes single-cycle multiply. The 16 KB Flash and 4 KB RAM support a basic PID controller with I²C sensor polling.
NXP lists the LPC812M101JDH16FP as Active with ROHS3 compliance. No end-of-life notice or last-time-buy schedule is in effect.
It comes in a 16-TSSOP package (0.173", 4.40 mm width) with 14 general-purpose I/O pins available.
The core is a 32-bit ARM Cortex-M0+ single-core processor running at 30 MHz.
It has 16 KB of Flash program memory (16K x 8) and 4 KB of SRAM (4K x 8).
Within the LPC812 family, the LPC812M201JDH16FP offers 32 KB Flash in the same 16-TSSOP footprint and is a drop-in upgrade if firmware space requires more room.