NXP LPC80xM series, ARM Cortex-M0+ 32-bit MCU, 15 MHz, 16 KB Flash, 2 KB RAM, 17 I/O, 12x12b ADC, I2C/SPI/UART, 1.71–3.6 V, -40 to 105 °C, 32-HVQFN exposed pad, ROHS3 compliant, Active.
| Parameter | Value |
|---|---|
| Series | LPC80xM |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.71V ~ 3.6V |
| Operating temperature | -40°C ~ 105°C (TA) |
| Speed | 15MHz |
| Package | Tray |
| RAM size | 2K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Connectivity | I2C, SPI, UART/USART |
| Number of i (O) | 17 |
| Core processor | ARM® Cortex®-M0+ |
| Case | 32-VFQFN Exposed Pad |
| Data converters | A/D 12x12b |
| Program memory size | 16KB (16K x 8) |
The LPC802M001JHI33E runs the ARM Cortex-M0+ core at 15 MHz. The 16 KB Flash and 2 KB RAM mean the firmware image must be lean; a typical application is a protocol bridge (UART to I2C) or a small motor controller reading a Hall sensor and driving a PWM output.
Status is Active, ROHS3 compliant. This part is safe to specify into a new BOM.
The ARM Cortex-M0+ core runs at 15 MHz, which is the maximum clock frequency for this device.
It is rated for -40 °C to 105 °C, covering industrial and automotive cabin environments.
The part is ROHS3 compliant per the listing; NXP typically provides a Declaration of Compliance and material composition data on request.