Skip to main content
Log in
NXP USA Inc. LPC54018JBD208E — Microcontrollers & Processors (MCU / MPU / DSP)

NXP LPC54018JBD208E ARM Cortex-M4 MCU, 180 MHz, 360 KB SRAM

MPNLPC54018JBD208E
Active

NXP LPC540xx series, 32-bit single-core ARM Cortex-M4 MCU at 180 MHz, ROMless (external flash required), 360 KB SRAM, 171 I/O, 208-LQFP (28×28 mm), Ethernet/CANbus/USB/I²S/SPIFI/LCD/12-bit ADC, 1.71–3.6 V supply, -40 to 105 °C, tray.

$13.7300Ref. price · indicative, final on quote
NXP USA Inc. LPC54018JBD208E datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LPC54018JBD208E specifications
ParameterValue
SeriesLPC540xx
MountingSurface Mount
Oscillator typeInternal
Program memory typeROMless
Voltage - supply (Vcc (Vdd))1.71V ~ 3.6V
Operating temperature-40°C ~ 105°C (TA)
Speed180MHz
PackageTray
RAM size360K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
ConnectivityCANbus, EBI/EMI, Ethernet, I²C, MMC/SD/SDIO, SmartCard, SPI, SPIFI, UART/USART, USB
Number of i (O)171
Core processorARM® Cortex®-M4
Case208-LQFP
Data convertersA/D 12x12b

Product details

The LPC54018JBD208E runs an ARM Cortex-M4 at 180 MHz with 360 KB on-chip SRAM.

Peripheral set — single-chip gateway or HMI

Ethernet MAC, CANbus, USB, I²S, and an LCD controller all live on this die. That means a single LPC54018JBD208E can handle protocol bridging (Ethernet to CAN), drive a small TFT display, and stream audio over I²S — no second MCU or external PHY for the display interface. The 171 GPIOs leave room for parallel EBI/EMI expansion if the external flash or an FPGA needs a fast bus. The 12-bit ADC with 12 channels covers analog front-end inputs like potentiometer feedback, current-sense resistors, or temperature NTCs without an external ADC chip.

No end-of-life notice is on record, so normal production-channel procurement applies.

Frequently asked questions

What is LPC54018JBD208E's listed speed?

The core runs at 180 MHz, which is the maximum clock for the ARM Cortex-M4 on this device.

What compliance documentation does NXP provide for LPC54018JBD208E?

NXP provides RoHS and REACH compliance declarations for this part. The 208-LQFP package is halogen-free per NXP's standard material declaration. UL and IEC certifications are not listed on the component-level record.

Does LPC54018JBD208E have a pin-compatible alternative in the same family?

The LPC540xx series includes several ROMless Cortex-M4 parts in the 208-LQFP footprint with varying SRAM sizes and peripheral sets. A direct pin-compatible sibling is the LPC54016JBD208E (same package, lower SRAM). Verify the exact memory and peripheral match against your firmware before substituting.