Skip to main content
Log in
NXP USA Inc. LPC54018J2MET180E — Microcontrollers & Processors (MCU / MPU / DSP)

NXP LPC54018J2MET180E ARM Cortex-M4 MCU, 180MHz

MPNLPC54018J2MET180E
Active

NXP LPC540xx series, ARM Cortex-M4 32-bit single-core at 180MHz, 2MB Flash, 360KB RAM, 137 I/O, Ethernet/CAN/I²C/SPI/USB, 12-ch 12-bit ADC, 1.71V–3.6V supply, -40°C to 105°C, 180-TFBGA tray.

$13.9200Ref. price · indicative, final on quote
NXP USA Inc. LPC54018J2MET180E datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LPC54018J2MET180E specifications
ParameterValue
SeriesLPC540xx
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.71V ~ 3.6V
Operating temperature-40°C~105°C(TA)
Speed180MHz
PackageTray
RAM size360K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
ConnectivityCANbus, EBI/EMI, Ethernet, I²C, MMC/SD/SDIO, SmartCard, SPI, SPIFI, UART/USART, USB
Number of i (O)137
Core processorARM® Cortex®-M4
Case180-TFBGA
Data convertersA/D 12x12b
Program memory size2MB (2M x 8)

Product details

The NXP LPC54018J2MET180E is a 32-bit ARM Cortex-M4 microcontroller from the LPC540xx series, clocked at 180 MHz. It carries 2 MB of Flash program memory and 360 KB of RAM — enough headroom for a GUI stack, Ethernet TCP/IP offload, and a real-time control loop without external memory. The 137 GPIOs and the peripheral set (Ethernet, CAN, USB, multiple SPI/I²C, plus an external bus interface) make it a natural fit for an HMI panel that talks to a PLC over Modbus TCP while logging data to an SD card over SDIO.

Memory budget — 2 MB Flash, 360 KB RAM

The 2 MB Flash and 360 KB RAM support firmware with a TCP/IP stack and SD card logging.

No last-time-buy or end-of-life notice is available.

Frequently asked questions

What is LPC54018J2MET180E's listed speed?

The core processor runs at 180 MHz. That is the ARM Cortex-M4 clock speed, delivering roughly 225 DMIPS for real-time task scheduling and protocol processing.

What is the temperature range for LPC54018J2MET180E?

The operating temperature range is -40°C to 105°C, which qualifies it for industrial environments such as motor drives, outdoor telecom, and engine-bay electronics.