NXP LPC2132FBD64/01EL, LPC2100 series, ARM7® 16/32-bit MCU, 60MHz, 64KB Flash, 16KB RAM, 47 I/O, 8x10b SAR ADC plus 1x10b DAC, internal oscillator, 3.3V supply, -40°C to 85°C operating temperature, 64-LQFP (10x10mm) surface-mount tray.
- 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
- Date & lot codes on quoteStated per line before you commit; label photos on request.
- MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
- PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
Specifications
| Parameter | Value |
|---|---|
| Series | LPC2100 |
| Mounting type | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 3V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 60MHz |
| Package | Tray |
| RAM size | 16K x 8 |
| Core size | 16/32-Bit |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Connectivity | I²C, Microwire, SPI, SSI, SSP, UART/USART |
| Number of i (O) | 47 |
| Core processor | ARM7® |
| Case | 64-LQFP |
| Data converters | A/D 8x10b SAR; D/A 1x10b |
| Program memory size | 64KB (64K x 8) |
Frequently asked questions
Does the LPC2132FBD64/01EL require an external crystal or can the internal oscillator drive the PLL directly?
The oscillator type is Internal — the PLL can be driven from the internal oscillator without an external crystal for basic operation. Timing-critical serial communication (UART, SSI) derives from the PLL-locked system clock; verify the oscillator tolerance over your 55°C ambient against your baud-rate error budget using the NXP datasheet.
Are there any second-source or pin-compatible ARM7 microcontrollers from another manufacturer matching 64KB Flash / 16KB RAM / 47 I/O?
No official second-source or cross-reference alternate appears in the LPC2100 ledger for this order code. Dual-sourcing for panel-build quantities of 10–25 requires a cross-registered alternate, which is not present — the sourcing path is authorized-distributor stock only.
What are the brown-out reset thresholds and POR release voltage levels on the LPC2132?
Brown-out Detect/Reset and POR are listed as on-chip peripherals, but the specific reset and release voltage thresholds are not in the sourcing ledger. They are datasheet parameters — confirm against the NXP LPC2132 datasheet before designing into a 3.3V rail with a 5% tolerance band.