NXP LPC15xx series 32-bit ARM Cortex-M3 MCU, LPC1518JBD64E, 72 MHz core, 128 KB Flash, 20 KB RAM, 4 KB EEPROM, CANbus, 46 I/O, 64-LQFP, -40 to 105°C.
| Parameter | Value |
|---|---|
| Series | LPC15xx |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 2.4V ~ 3.6V |
| Operating temperature | -40°C~105°C(TA) |
| Speed | 72MHz |
| Package | Tray |
| RAM size | 20K x 8 |
| Core size | 32-Bit Single-Core |
| EEPROM size | 4K x 8 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Connectivity | CANbus, I²C, SPI, UART/USART |
| Number of i (O) | 46 |
| Core processor | ARM® Cortex®-M3 |
| Case | 64-LQFP |
| Data converters | A/D 24x12b |
| Program memory size | 128KB (128K x 8) |
The NXP LPC1518JBD64E is a 32-bit ARM Cortex-M3 microcontroller running at 72 MHz, with 128 KB of Flash program memory and 20 KB of SRAM. The internal oscillator and brown-out detect circuitry reduce external component count, and the 46 GPIOs give enough headroom for parallel sensor arrays or local HMI buttons.
128 KB of Flash and 20 KB SRAM. The 4 KB EEPROM stores calibration constants and node ID without external EEPROM.
Yes, the LPC1518JBD64E includes a CANbus controller alongside I²C, SPI, and UART/USART interfaces.
The supply voltage range is 2.4 V to 3.6 V, allowing operation from a 3.3 V or 2.5 V rail.
The LPC1518JBD64 is a pin-compatible variant in the same LPC15xx family. Verify the temperature grade and package match your BOM before substitution.