NXP LPC11Cxx series 32-bit ARM Cortex-M0 MCU, LPC11C24FBD48/301, 50 MHz core, 32 KB Flash, 8 KB RAM, integrated CAN 2.0B, I²C, SPI, SSP, UART, 36 GPIO, 8-channel 10-bit ADC, 1.8 V to 3.6 V supply, -40°C to 85°C, 48-LQFP (7x7 mm), tray.
| Parameter | Value |
|---|---|
| Series | LPC11Cxx |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 50MHz |
| Package | Tray |
| RAM size | 8K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Connectivity | CANbus, I²C, Microwire, SPI, SSI, SSP, UART/USART |
| Number of i (O) | 36 |
| Core processor | ARM® Cortex®-M0 |
| Case | 48-LQFP |
| Data converters | A/D 8x10b |
| Program memory size | 32KB (32K x 8) |
The internal oscillator and brown-out detect reset keep the core running through supply dips common on industrial backplanes.
Lifecycle status is Active. No last-time-buy or NRND flags exist, so this part is a stable line item for current and next-revision BOMs.
The ARM Cortex-M0 core runs at 50 MHz, which delivers enough throughput for real-time CAN message handling at 1 Mbit/s with headroom for local sensor polling and actuator control loops.
Yes, the LPC11C24FBD48/301 integrates a CAN 2.0B controller on-chip, eliminating the need for an external CAN controller IC and reducing BOM cost and board area for networked control nodes.