LQH43NH2R2J03L

Murata Electronics

Murata Electronics LQH43 series drum core wirewound inductor, 2.2 µH, ±5%, 1 A, 58.8 mOhm DCR, unshielded, 1812 (4532 Metric), AEC-Q200.

Murata Electronics LQH43NH2R2J03L
Download datasheet (PDF)
[IN STOCK] In Stock: 152 pcs
$0.40/ pc

Volume pricing

Buy Now

Subtotal:$2.00

MOQ 5 · Tape & Reel (TR); Cut Tape (CT) · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

LQH43NH2R2J03L specifications
Parameter / AttributeSpecification / Value
TypeDrum Core, Wirewound
SeriesLQH43
MountingSurface Mount
Current rating1 A
Frequency - self resonant62MHz
Inductance frequency - test1 MHz
Operating temperature-40°C~125°C
Material - coreFerrite
Size (Dimension)0.177\" L x 0.126\" W (4.50mm x 3.20mm)
Height - seated0.110\" (2.80mm)
PackageTape & Reel (TR); Cut Tape (CT)
RatingsAEC-Q200
Q @ freq20 @ 1MHz
ShieldingUnshielded
Tolerance±5%
Inductance2.2 µH
Case1812 (4532 Metric)
DC resistance58.8mOhm Max

Technical details

2.2 µH wirewound in a 1812 footprint

The Murata LQH43NH2R2J03L is a 2.2 µH drum core wirewound inductor in the LQH43 series, packaged in an 1812 (4532 Metric) surface-mount footprint. Rated for 1 A continuous current with a maximum DC resistance of 58.8 mOhm, this part handles moderate power rail filtering and DC-DC converter output smoothing without excessive copper loss. The ferrite core construction and unshielded design keep the component cost low, but the open magnetic field means adjacent traces need spacing to avoid coupling — a consideration for dense PCB layouts.

AEC-Q200 grade and temperature range

AEC-Q200 qualification certifies this inductor for automotive stress levels — vibration, thermal shock, and humidity bias — making it a fit for under-hood electronics, infotainment, and ADAS sensor power supplies.

Frequency response and Q factor

Self-resonant frequency of 62 MHz means the inductor behaves inductively up to that point — above it, parasitic capacitance dominates and the impedance rolls off. For switching converters switching below 6 MHz, this is well clear of the resonance. A Q factor of 20 at 1 MHz indicates moderate energy storage efficiency at that frequency — adequate for general-purpose filtering but not optimized for narrow-band resonant circuits where higher Q is preferred. Inductance is tested at 1 MHz, which is the standard reference frequency for this value range — the actual inductance at DC or at the switching frequency will be within the ±5% tolerance band.

LQH43NH2R2J03L
[ALLOC] verified
Quote