Parametric fit for a 10 µH power rail
The DFEG12060D-100M=P3 is a 10 µH shielded power inductor from Murata's DFEG12060D series, built around an iron powder core. It carries a continuous current rating of 7.9 A and a saturation current floor of 8.8 A — the saturation point is the hard ceiling for peak transient currents, so a converter drawing 7 A steady with 20 % ripple stays inside the linear region. DC resistance is 20 mOhm max, which at 7.9 A produces roughly 1.25 W of I²R loss — enough to matter in a thermal budget for a compact 13.00 mm × 12.60 mm footprint. The 100 kHz test frequency is typical for switching regulators in this inductance class.
AEC-Q200 and the Last Buy window
The qualification means it carries the reliability data package an automotive Tier 1 requires for PPAP submission. Murata has placed the DFEG12060D-100M=P3 into Last Buy status. That means the manufacturer is no longer accepting volume orders for ongoing production — this part is not for new designs. Existing BOM lines should plan a last-time-buy quantity or identify a functional replacement before Murata closes the order window entirely.
Sourcing a Last Buy part
Because this is a Last Buy part, the normal authorized-distributor channel may have limited remaining stock. The nonstandard package footprint (13.00 mm × 12.60 mm) means the pad layout is specific to this series — confirm the land pattern against your PCB before committing the BOM line.