Flat-wire winding and saturation headroom
The DFE252008C-R47M=P2 uses a flat-wire winding on an iron powder core, which keeps the DC resistance at 60 mΩ max while delivering a 2 A continuous current rating. The saturation current is rated at 3 A, so a 50 % overload margin exists before the inductance rolls off — useful for peak-load steps in a DC-DC converter output filter. Shielded construction means the 470 nH flux stays contained within the 1008 (2520) package — adjacent traces on a dense board won't couple noise into the inductor, and the inductor won't radiate switching ripple into nearby analog or RF stages.
Footprint and thermal fit for a 2 A rail
The low profile suits height-constrained designs like solid-state drives or thin-format power modules. The iron powder core material has a stable permeability over this band, so the inductance value drifts less than ferrite-based alternatives across temperature.
Active production and sourcing posture
Murata lists this part as Active in production.