Skip to main content
Log in
Murata Electronics BLM15GG471SN1D — EMI Filters & Ferrite Beads

BLM15GG471SN1D Murata Ferrite Bead, 470 Ohm @ 100 MHz, 0402

MPNBLM15GG471SN1D
Active

Murata Electronics EMIFIL®, BLM15 series ferrite bead, BLM15GG471SN1D, 0402 (1005 metric) package, 470 Ohms @ 100 MHz, 200 mA, 1.3 Ohm DCR, -55 to 125 °C.

$0.4600Ref. price · indicative, final on quote
Murata Electronics BLM15GG471SN1D datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

BLM15GG471SN1D specifications
ParameterValue
SeriesEMIFIL®, BLM15
MountingSurface Mount
Current rating200mA
Impedance @ frequency470 Ohms @ 100 MHz
Operating temperature-55°C ~ 125°C
Height0.022\" (0.55mm)
Size (Dimension)0.039\" L x 0.022\" W (1.00mm x 0.55mm)
PackageTape & Reel (TR) Cut Tape (CT)
Case0402 (1005 Metric)
Number of lines1
DC resistance (DCR)1.3Ohm

Product details

Noise attenuation at 100 MHz

The BLM15GG471SN1D: The 470 Ohm impedance at 100 MHz targets conducted EMI in the 30–300 MHz band — common for switching regulator harmonics and digital clock noise on power rails.

0402 (1005 metric) footprint — 1.00 mm x 0.55 mm body, 0.55 mm seated height. Surface-mount assembly with standard reflow profile.

Murata lists the BLM15GG471SN1D as Active. The part belongs to the EMIFIL BLM15 series, a broad 0402 ferrite-bead family; pin-compatible alternatives within the same series (different impedance values) exist if the noise profile changes during design.

Frequently asked questions

What is the impedance of BLM15GG471SN1D at 100 MHz?

470 Ohms at 100 MHz. This is the peak attenuation frequency for conducted EMI filtering on power or signal lines.

What is the current rating and DC resistance of BLM15GG471SN1D?

Rated 200 mA maximum continuous current with a DC resistance of 1.3 Ohm max. At full rated current the voltage drop is approximately 260 mV.

What package size is BLM15GG471SN1D?

0402 (1005 metric) — 1.00 mm x 0.55 mm body, 0.55 mm seated height. Surface-mount for standard reflow assembly.

Is BLM15GG471SN1D RoHS compliant?

Murata lists this part under the EMIFIL series which is RoHS-compliant by default for the BLM15 family. Specific compliance documentation (RoHS, REACH) is available from Murata upon request.