Murata Electronics EMIFIL®, BLM15 series ferrite bead, signal line, 0402 (1005 Metric) package, 5 Ohms @ 100 MHz, 300 mA max, 100 mOhm DCR max.
| Parameter | Value |
|---|---|
| Series | EMIFIL®, BLM15 |
| Filter type | Signal Line |
| Mounting | Surface Mount |
| Current rating | 300mA |
| Impedance @ frequency | 5 Ohms @ 100 MHz |
| Operating temperature | -55°C ~ 125°C |
| Height | 0.022\" (0.55mm) |
| Size (Dimension) | 0.039\" L x 0.022\" W (1.00mm x 0.55mm) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Case | 0402 (1005 Metric) |
| Number of lines | 1 |
| DC resistance (DCR) | 100mOhm |
The BLM15BA050SN1D: Rated for 300 mA continuous current with a maximum DC resistance of 100 mOhm — the DCR sets the IR drop and self-heating in the signal path, so at 300 mA the voltage drop is 30 mV, negligible for most logic-level lines.
Impedance is 5 Ohms at 100 MHz — this is a low-impedance bead intended for high-frequency noise suppression on signal lines where the series resistance must stay low to avoid signal attenuation at DC.
5 Ohms at 100 MHz, with a maximum DC resistance of 100 mOhm and a continuous current rating of 300 mA.
0402 (1005 Metric) surface-mount package, supplied in Tape & Reel (TR) or Cut Tape (CT).