Active production, AEC-Q200 qualified
The BLM15AG700SZ1D: Suitable for under-hood and cabin-zone electronics where the ambient hits 125°C.
70 Ohm impedance at 100 MHz, 600 mA continuous
The 70 Ohm impedance at 100 MHz targets conducted EMI on signal and low-power rails — typical for suppressing switching noise on CAN/LIN bus lines, sensor power feeds, or MCU supply decoupling. At lower frequencies the impedance rolls off, so the bead leaves the intended signal intact. Rated for 600 mA continuous current with a max DCR of 150 mOhm. The 0402 case keeps the footprint small; the 0.55 mm seated height fits under low-profile shields.
0402 footprint, tape-and-reel delivery
Standard 0402 (1005 metric) case, surface-mount, single-line device. The tape-and-reel packaging (TR suffix) means it ships on 7-inch or 13-inch reels — confirm the reel quantity with your preferred reel size at quote time. No special bake or floor-life restrictions beyond the standard MSL 1 rating typical for these ferrite chips.