6V rail surge protection in a DO-214AC package
It handles 500W peak pulse power per the 10/1000µs waveform, with a clamping voltage of 10.3V at 48.5A peak pulse current.
Minimum breakdown voltage is 6.67V, so the diode starts conducting before the protected rail exceeds its absolute maximum. The 10.3V clamping ceiling at 48.5A means a 6V supply with a 12V-tolerant downstream device has roughly 1.7V of margin above the clamp — tight but workable if the PCB inductance is kept low. Bidirectional configuration (single channel) protects signal pairs or AC-coupled lines without needing two diodes back-to-back.
Submit an RFQ through the distributor portal for a firm lead-time and price commitment.