100 V rail clamp — 500 W peak pulse, DO-214AC
Its 500 W peak pulse power rating (10/1000 µs waveform) gives a 162 V clamping voltage at 3.1 A peak pulse current — the margin above the 111 V minimum breakdown voltage ensures the protected circuit sees no more than 162 V during a surge event.
Active production — tape & reel ordering
Microchip lists this part as Active, so no last-time-buy or obsolescence pressure on the BOM. Sourced per RFQ against your target quantity — no stock-holding claim, but the active status means lead times are predictable through the authorized channel.
The 100 V reverse standoff matches a 100 V DC bus or a 48 V telecom rail with margin for normal ripple. No power-line protection — it is a unidirectional clamp for signal or DC rail transients, not AC mains.