Skip to main content
Log in
Microchip Technology PIC16F1513-I/SP — Microcontrollers & Processors (MCU / MPU / DSP)

PIC16F1513-I/SP 8-bit MCU, 20MHz, 7KB Flash, 28-SPDIP

MPNPIC16F1513-I/SP
Active

Microchip PIC® XLP™ 16F PIC16F1513-I/SP, 8-bit MCU, 20MHz, 7KB Flash, 256 x 8 RAM, 25 I/O, I²C/LINbus/SPI/UART, 2.3V-5.5V, -40°C to 85°C, 28-DIP (0.300")

$1.9700Ref. price · indicative, final on quote
Microchip Technology PIC16F1513-I/SP datasheet (PDF)
Packaging28-DIP (0.300", 7.62mm)
RoHSROHS3 Compliant
SeriesPIC® XLP™ 16F
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

PIC16F1513-I/SP specifications
ParameterValue
SeriesPIC® XLP™ 16F
MountingThrough Hole
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))2.3V ~ 5.5V
Operating temperature-40°C ~ 85°C (TA)
Speed20MHz
PackageTube
RAM size256 x 8
Core size8-Bit
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityI²C, LINbus, SPI, UART/USART
Number of i (O)25
Core processorPIC
Case28-DIP (0.300\", 7.62mm)
Data convertersA/D 17x10b
Program memory size7KB (4K x 14)

Product details

20 MHz 8-bit PIC with 7 KB Flash in a 28-pin DIP

It runs at 20 MHz and carries 7 KB of Flash program memory (4K x 14 words) with 256 x 8 bytes of RAM. Serial connectivity covers I²C, LINbus, SPI, and UART/USART, which covers the common sensor and actuator interface needs for an 8-bit control application.

25 I/O and peripheral set

With 25 I/O lines available, this 28-pin DIP leaves most pins usable for general-purpose digital or analog input. The 17-channel 10-bit ADC is sized for reading multiple analog sensors — thermistors, potentiometers, current-sense resistors — without an external mux. The PWM module drives LEDs, small DC motors, or a piezo buzzer directly. Brown-out detect and the watchdog timer are standard for industrial firmware that needs to recover from a glitch without a manual reset.

Microchip lists the PIC16F1513-I/SP as Active product status, so there is no end-of-life or last-time-buy pressure for current designs.

Frequently asked questions

What is the programming interface for PIC16F1513-I/SP?

The PIC16F1513-I/SP uses Microchip's In-Circuit Serial Programming (ICSP) interface, which maps to the MCLR/Vpp, VDD, VSS, PGD (RB7), and PGC (RB6) pins. An ICSP header or a PICkit/ICD debugger connects directly to these five lines. The internal oscillator is enabled by default, so no external clock is needed to start programming.

Is PIC16F1513-I/SP RoHS and lead-free compliant?

Yes, the PIC16F1513-I/SP is ROHS3 Compliant per Microchip's lifecycle record. The part carries no lead-exemption flags, so it ships into RoHS-restricted territories without restriction.

What is the maximum operating frequency of PIC16F1513-I/SP?

The rated core speed is 20 MHz. Running above 20 MHz is outside the datasheet limits.