Skip to main content
Microchip Technology MCP6L72T-E/SN — Memory (DRAM / SRAM / Flash / EEPROM)
Microchip Technology

MCP6L72T-E/SN Dual Rail-to-Rail Op-Amp, 2 MHz GBWP, 8-SOIC

MPNMCP6L72T-E/SN
End of Life

Microchip MCP6L72T-E/SN, dual general-purpose op-amp, 2 MHz gain bandwidth, 0.9 V/µs slew rate, rail-to-rail output, 150 µA supply per channel, 2 V to 6 V supply, -40°C to 125°C, 8-SOIC.

$0.77Ref. price · indicative, final on quote
MCP6L72T-E/SN datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MCP6L72T-E/SN Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span6 V
Current - supply150µA (x2 Channels)
Current - input bias1 pA
Current - output (Channel)25 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product2 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.9V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

What the 2 MHz gain bandwidth buys you

The Microchip MCP6L72T-E/SN is a dual-channel, general-purpose op-amp with a 2 MHz gain bandwidth product and rail-to-rail output stage. This combination lets you close a gain-of-10 amplifier with 200 kHz of small-signal bandwidth, or buffer a sensor output into a 0–3.3 V ADC input without headroom loss. The 0.9 V/µs slew rate handles audio-frequency signals cleanly, and the 1 pA input bias current means no significant offset drift from source impedance — useful for high-impedance transducers like photodiodes or pH probes.

150 µA per channel — low-power signal chain

Each amplifier draws 150 µA of supply current, so the dual package consumes 300 µA total at no load. That makes the MCP6L72T-E/SN a strong fit for battery-operated instruments, 4–20 mA loop-powered transmitters, or multi-channel data-acquisition boards where every milliwatt counts.

Microchip lists the MCP6L72T-E/SN as an active product with ROHS3 compliance.

Frequently asked questions

Can MCP6L72T-E/SN run at 3.3V?

Yes. The supply voltage range is 2 V to 6 V, so a 3.3 V rail is well within spec.

What is an equivalent for MCP6L72T-E/SN?

The MCP6272 draws 200 µA per channel (versus 150 µA) and has a slightly higher 3 mV input offset voltage. For a single-channel alternative, the MCP6L71T-E/MS is the single version of this family.

Is MCP6L72T-E/SN compatible with 5V supply?

Yes. The 2 V to 6 V supply span includes 5 V. The rail-to-rail output stage can swing within 50 mV of the 5 V rail, giving a 4.9 V output swing into a high-impedance load.