Skip to main content
Log in
Microchip Technology MCP6H01T-E/OT — Analog & Data Acquisition

MCP6H01T-E/OT General Purpose Op-Amp, 1.2 MHz

MPNMCP6H01T-E/OT
End of Life

Microchip MCP6H01T-E/OT, single general-purpose op-amp, 1.2 MHz gain bandwidth, 0.8 V/µs slew rate, rail-to-rail output, 135 µA supply current, 3.5 V to 16 V supply, -40°C to 125°C, SOT-23-5 package.

$0.83Ref. price · indicative, final on quote
Microchip Technology MCP6H01T-E/OT datasheet (PDF)
PackagingSC-74A, SOT-753
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MCP6H01T-E/OT specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset700 µV
Voltage - supply span3.5 V
Current - supply135µA
Current - input bias10 pA
Operating temperature-40°C ~ 125°C
Gain bandwidth product1.2 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.8V/µs
CaseSC-74A, SOT-753
Number of circuits1

Product details

Single-channel general-purpose op-amp for 5 V to 12 V signal chains

The 3.5 V to 16 V supply span lets this part work on both 5 V and 12 V rails without a secondary regulator, simplifying power distribution on mixed-voltage boards.

Package and footprint — SOT-23-5

Housed in a SOT-23-5 package (SC-74A, SOT-753), this op-amp fits a standard 5-pin footprint with 0.95 mm pitch. Surface-mount assembly is straightforward for reflow processes. The single-channel configuration leaves the other four pins for supply, input, and output — no unused channels to terminate.

Frequently asked questions

Is MCP6H01T-E/OT obsolete or end-of-life?

No.

Is MCP6H01T-E/OT a rail-to-rail op amp?

Yes, the output type is rail-to-rail, which maximizes the output voltage swing when operating from low supply voltages. The input common-mode range is not rail-to-rail — it extends from the negative rail to about 1.1 V below the positive rail, so high-side sensing at 3.5 V supply requires checking the input range.

What is a suitable replacement for MCP6H01T-E/OT?

The closest functional second-source is the MCP6H02T-E/SN, which is a dual-channel version with identical 1.2 MHz GBWP, 0.8 V/µs slew rate, and 10 pA input bias current. If you need a single channel in the same SOT-23-5 footprint, the MCP6L71T-E/MS offers 2 MHz GBWP and 0.9 V/µs slew rate but with a 2.0 V minimum supply — check the supply voltage compatibility.