Skip to main content
Microchip Technology MCP6492T-E/MNY — Memory (DRAM / SRAM / Flash / EEPROM)
Microchip Technology

MCP6492T-E/MNY Dual Op-Amp, 7.5 MHz GBWP

MPNMCP6492T-E/MNY
End of Life

Microchip MCP6492T-E/MNY, dual general-purpose op-amp, 7.5 MHz gain bandwidth, 6 V/µs slew rate, rail-to-rail output, 2.4 V to 5.5 V supply, 8-TDFN package, -40°C to 125°C.

$1.12Ref. price · indicative, final on quote
MCP6492T-E/MNY datasheet
Packaging8-WFDFN Exposed Pad
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MCP6492T-E/MNY Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1.5 mV
Voltage - supply span5.5 V
Current - supply530µA (x2 Channels)
Current - input bias1 pA
Current - output (Channel)15 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product7.5 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate6V/µs
Case8-WFDFN Exposed Pad
Number of circuits2

Product details

530 µA per channel — the power budget decision

The MCP6492T-E/MNY: At 530 µA per channel (1.06 mA total for both amplifiers), this part sits in the low-power tier for a 7.5 MHz GBWP op-amp. If you are counting microamps in a coin-cell-powered design, the supply current is the first number to check against your system sleep and active budgets. The rail-to-rail output swing lets you drive an ADC input or a comparator without losing headroom at low supply voltages — useful when the rail is 3.3 V or lower.

Package and thermal: the exposed pad matters

The 8-TDFN package measures 2x3 mm and includes an exposed pad. The pad carries the bulk of the thermal dissipation.

Frequently asked questions

Is MCP6492T-E/MNY a rail-to-rail output op amp?

Yes, the output type is rail-to-rail.

What are the equivalent alternatives to MCP6492T-E/MNY?

Within Microchip's portfolio, the single-channel MCP6291T-E/MS offers a higher 10 MHz GBWP and 7 V/µs slew rate, while the dual-channel MCP6272T-E/SN is a lower-speed option at 2 MHz GBWP and 0.9 V/µs slew rate. Neither is a direct pin-compatible second source due to different package and channel count, but they serve similar signal-conditioning roles.