Skip to main content
Microchip Technology MCP6471T-E/LTY — Memory (DRAM / SRAM / Flash / EEPROM)
Microchip Technology

MCP6471T-E/LTY General Purpose Op-Amp, 2 MHz, Rail-to-Rail

MPNMCP6471T-E/LTY
End of Life

Microchip MCP6471T-E/LTY general purpose op-amp, single circuit, 2 MHz gain bandwidth, 1.1 V/µs slew rate, rail-to-rail output, 100 µA supply, 2 V to 5.5 V supply range, -40°C to 125°C, SC-70-5 package.

$0.6Ref. price · indicative, final on quote
MCP6471T-E/LTY datasheet
Packaging5-TSSOP, SC-70-5, SOT-353
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MCP6471T-E/LTY Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1.5 mV
Voltage - supply span5.5 V
Current - supply100µA
Current - input bias1 pA
Operating temperature-40°C ~ 125°C
Gain bandwidth product2 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1.1V/µs
Case5-TSSOP, SC-70-5, SOT-353
Number of circuits1

Product details

Active general-purpose op-amp in a tiny SC-70-5 package

The Microchip MCP6471T-E/LTY is a single-circuit, general-purpose operational amplifier with a 2 MHz gain-bandwidth product and a 1.1 V/µs slew rate. The SC-70-5 package (also listed as 5-TSSOP, SC-70-5, SOT-353) saves board area for space-constrained layouts.

The 2 MHz gain-bandwidth product sets the usable frequency range: at a gain of 10, the closed-loop bandwidth is about 200 kHz. The 1.1 V/µs slew rate limits large-signal response — expect a full output swing of roughly 3 V to settle in about 2.7 µs. For audio, sensor conditioning, or control loops below 100 kHz, this part has enough speed without burning extra supply current. The 1 pA input bias current (typical) and 1.5 mV input offset voltage (max) keep DC errors low for precision analog front-ends.

It is ROHS3 compliant.

Frequently asked questions

Where can I buy the MCP6471T-E/LTY available via RFQ confirmation today?

The MCP6471T-E/LTY is available to order through independent distribution. Submit an RFQ for current availability and pricing, which are confirmed at quote time.

Is the MCP6471T-E/LTY a rail-to-rail op-amp?

Yes, the MCP6471T-E/LTY has a rail-to-rail output stage, allowing the output to swing close to the supply rails in single-supply designs.