Dual op-amp for general-purpose signal conditioning
The 0.9 V/µs slew rate handles audio-band and slow sensor signals without excessive ringing.
Supply voltage and power budget
The 2 V minimum supply lets this part run from a single Li-ion cell or a 3.3 V rail with headroom, while the 6 V maximum covers 5 V logic rails. Total supply current for both channels is 340 µA typical, so the power budget stays under 2 mW at 5 V — a clean fit for loop-powered transmitters or portable instruments.
Input bias current is 1 pA typical, which is negligible for high-impedance sensors like photodiodes or pH probes. Input offset voltage is 3 mV maximum — acceptable for general-purpose amplification but worth noting if you need sub-mV precision; for that, look at the MCP6L72 or a zero-drift type.