Skip to main content
Microchip Technology MCP607T-I/SN — Memory (DRAM / SRAM / Flash / EEPROM)
Microchip Technology

MCP607T-I/SN CMOS Op Amp, 155 kHz, Rail-to-Rail Output

MPNMCP607T-I/SN
End of Life

Microchip MCP607T-I/SN, CMOS dual operational amplifier, 155 kHz gain bandwidth, 0.08 V/µs slew rate, rail-to-rail output, 2.5 V to 6 V supply, 18.7 µA supply current, -40°C to 85°C, 8-SOIC package, Tape & Reel.

$1.35Ref. price · indicative, final on quote
MCP607T-I/SN datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MCP607T-I/SN Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset250 µV
Voltage - supply span2.5 V
Current - supply18.7µA (x2 Channels)
Current - input bias1 pA
Current - output (Channel)17 mA
Operating temperature-40°C ~ 85°C (TA)
Gain bandwidth product155 kHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.08V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

155 kHz GBWP and 0.08 V/µs slew rate — a low-speed, micropower dual op-amp

It delivers rail-to-rail output swing, operates from a single supply spanning 2.5 V to 6 V, and draws just 18.7 µA total supply current for both channels. This combination targets low-frequency signal conditioning — sensor buffers, battery monitors, and general-purpose analog front-ends — where power budget matters more than speed.

With 17 mA output current per channel, it can drive moderate loads like reference inputs or small relays, but not heavy loads like solenoids.

Package and mounting — 8-SOIC in Tape & Reel

The surface-mount SOIC-8 footprint is a standard, widely supported land pattern. For manual prototyping, the Cut Tape option is also available.

Frequently asked questions

Where can I buy MCP607T-I/SN available via RFQ confirmation?

MCP607T-I/SN is available to order. Submit an RFQ through this listing to receive a firm quote and lead time.

Is MCP607T-I/SN a rail-to-rail op amp?

Yes, the MCP607T-I/SN has a rail-to-rail output stage. The input common-mode range is not specified as rail-to-rail, so for high-side sensing at low supply voltages, check the input range against your signal.

What is the MCP607T-I/SN slew rate?

The slew rate is 0.08 V/µs. This is consistent with the 155 kHz gain bandwidth and confirms the part is intended for low-frequency signal processing, not high-speed or fast-settling applications.

What is the MCP607T-I/SN alternative or equivalent?

A close functional alternative within Microchip's portfolio is the MCP6142T-I/SN, a general-purpose dual op-amp with 100 kHz GBWP, 0.024 V/µs slew rate, and 600 nA per-channel supply current. The MCP6142 operates down to 1.4 V and draws significantly less current, making it a better fit for extreme low-power designs, but its bandwidth is lower. The MCP6V17T-E/MS offers zero-drift performance with 80 kHz GBWP and 25 µV offset, suited for precision DC applications. Neither is a drop-in replacement without evaluating the parametric differences.