Microchip Technology DSC8122 series, XO (Standard), LVPECL output, MEMS resonator, 6-SMD No Lead, AEC-Q100, ±10ppm stability, 10 MHz ~ 460 MHz, 2.25V ~ 3.6V supply.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC8122 |
| Mounting | Surface Mount |
| Programmable type | Blank (User Must Program) |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 58mA |
| Current - supply (Disable) | 22 mA |
| Frequency stability | ±10ppm |
| Available frequency range | 10 MHz ~ 460 MHz |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | LVPECL |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
The DSC8122BI5T: That shutdown current matters for a module that sleeps between CAN bus wake-ups — the oscillator's own draw stays below the quiescent budget of the downstream PHY.
The part ships as a blank (user-programmable), so the frequency is set at programming, not at the factory; order the programmed variant or plan a programming step in the assembly flow.
The output is LVPECL (Low-Voltage Positive Emitter-Coupled Logic). LVPECL delivers a differential signal with fast edge rates and low jitter, making it the usual choice for clocking high-speed ADCs, FPGAs, and 10+ GbE PHYs where single-ended CMOS would introduce too much phase noise.
The DSC8122BI5T is AEC-Q100 qualified. RoHS and REACH compliance declarations are available from Microchip's documentation portal for the DSC8122 base series.