Skip to main content
Microchip Technology DSC8103CI5-PROGRAMMABLE — Crystals & Oscillators

Microchip DSC8103CI5-PROGRAMMABLE MEMS XO, LVDS, AEC-Q100

MPNDSC8103CI5-PROGRAMMABLE
Active

Microchip Technology DSC8103 series, XO (Standard) MEMS oscillator, LVDS output, 10 MHz to 460 MHz, ±10 ppm total stability, AEC-Q100, 6-SMD No Lead, Tube.

$31.3700Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC8103CI5-PROGRAMMABLE specifications
ParameterValue
TypeXO (Standard)
SeriesDSC8103
MountingSurface Mount
Voltage2.25V ~ 3.6V
Current - supply32mA
Current - supply (Disable)95 µA
Available frequency range10 MHz ~ 460 MHz
Frequency stability (Total)±10ppm
Operating temperature-40°C ~ 85°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputLVDS
PackageTube
RatingsAEC-Q100
FunctionStandby
Base resonatorMEMS
Case6-SMD, No Lead

Product details

What the AEC-Q100 rating means for your board

The DSC8103CI5-PROGRAMMABLE: For an ECU, ADAS camera, or any module that lives under the hood or in the cabin, this qualification is the gate: without it, the part does not go into the BOM for a production vehicle. If your design sees sustained 105°C or higher, you need a different temperature grade — this one tops out at 85°C ambient.

MEMS resonator and programmable frequency range

This is a MEMS-based oscillator, not a quartz crystal. The MEMS resonator is factory-programmed to any frequency between 10 MHz and 460 MHz, which means one part number covers a wide clock tree — you do not need separate quartz cuts for each frequency. The LVDS output delivers a differential signal with typical 350 mV swing into a 100-ohm termination. This is the right choice for high-speed serial links, SerDes reference clocks, or any line where common-mode noise rejection matters — the differential pair keeps the clock clean across a backplane or a long PCB trace.

No exposed pad to route; just the six pads for supply, ground, output, and enable.

Frequently asked questions

What is the closest pin-compatible alternative to DSC8103CI5-PROGRAMMABLE in this family?

The DSC8103 series includes multiple frequency-stability and temperature-grade variants in the same 6-SMD No Lead package. The closest sibling would share the same LVDS output, supply range, and pinout — the difference is in the stability spec or temperature range. No official cross-reference or second-source part is listed; the best alternative is another DSC8103 order code with the matching frequency and stability grade.