Active production, AEC-Q100 qualified MEMS oscillator
The DSC6311JI1BB-012.0000T: The MEMS resonator base inherently resists shock and vibration better than a quartz blank, so the frequency stays locked through a 50g drop or a high-vibration conveyor line.
Active draw is 3 mA typical — low enough for a sensor node running on a coin cell, but check the total system budget if the oscillator feeds multiple clock domains.
Spread spectrum and frequency stability for EMI compliance
±0.50% center-spread spread spectrum bandwidth modulates the output frequency around 12 MHz to spread the radiated energy and reduce peak EMI at the fundamental — useful for passing CISPR 25 or FCC Class B without a metal can or ferrite bead.
Package and board-fit for space-constrained layouts
Surface-mount in Tape & Reel supports automated pick-and-place assembly; the small body means the solder paste stencil aperture needs careful sizing to avoid tombstoning.