Microchip Technology DSC613 series MEMS XO (Standard), order code DSC613RI2A-012ST, 6-VFLGA package, three LVCMOS outputs (12 MHz, 25 MHz, 32.768 kHz), ±25 ppm stability, 1.71V–3.63V supply, -40°C to +85°C.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC613 |
| Supply voltage | 1.71V ~ 3.63V |
| Current - supply | 6.5mA |
| Frequency stability | ±25ppm |
| Frequency - output 1 | 12MHz |
| Frequency - output 2 | 25MHz |
| Frequency - output 3 | 32.768kHz |
| Operating temperature | -40°C~85°C |
| Height | 0.035\" (0.89mm) |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Output | LVCMOS |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Base resonator | MEMS |
| Case | 6-VFLGA |
The DSC613RI2A-012ST: The three frequencies are factory-programmed to 12 MHz, 25 MHz, and 32.768 kHz — covering a typical MCU main clock, a high-speed peripheral clock, and a real-time-clock or sleep-mode tick, all in one device.
Maximum supply current is 6.5 mA across all three outputs active — a low enough draw that a small 0603 decoupling cap at the VDD pin is sufficient for most layouts.
The small footprint frees board space on dense multi-layer designs.
The three LVCMOS outputs are factory-set to 12 MHz, 25 MHz, and 32.768 kHz. This combination covers a main system clock, a higher-speed peripheral clock, and a low-speed RTC or sleep timer from a single oscillator.
Maximum supply current is 6.5 mA with all three outputs active.