The DSC6112JE2A-000.0000: For a CAN bus or FlexRay clock source, this keeps the bit timing within the 1% tolerance window without external trimming.
Typical active current draw is 3 mA at the rated frequency, while the standby (disable) mode drops to 12 µA max — the output goes high-Z and the oscillator core powers down, preserving battery in a key-off state. The part is a blank (user-programmable) device — the frequency is not factory-set. The buyer programs it to the target frequency within the 1 MHz to 100 MHz range using Microchip's programming tools before reflow. This means the same order code can serve multiple frequency BOM lines if the programming step is managed in-house.
Obsolete — sourcing posture and what replaces it
No official successor order code is recorded in the lifecycle data.
The land pattern matches the standard 4-pad MEMS oscillator footprint used across the DSC61XX family. Surface-mount reflow profile per JEDEC J-STD-020 applies; the tube packaging is suitable for pick-and-place feeders with tube-handling accessories.