Skip to main content
Log in
Microchip Technology DSC6111JE2A-000.0000 — Crystals & Oscillators

DSC6111JE2A-000.0000 MEMS XO, CMOS, AEC-Q100, Obsolete

MPNDSC6111JE2A-000.0000
Obsolete

Microchip Technology DSC61XX series XO (Standard), MEMS-based, CMOS output, 4-SMD No Lead package, 1.71V-3.63V supply, AEC-Q100 rated, Obsolete.

$0.8700Ref. price · indicative, final on quote
Microchip Technology DSC6111JE2A-000.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DSC6111JE2A-000.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC61XX
MountingSurface Mount
Programmable typeBlank (User Must Program)
Supply voltage1.71V ~ 3.63V
Current - supply3mA (Typ)
Current - supply (Disable)12 µA
Available frequency range1 MHz ~ 100 MHz
Frequency stability (Total)±25ppm
Operating temperature-20°C~70°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC6111JE2A-000.0000: Active current draw is just 3 mA typical, and the standby (disable) current drops to 12 µA max — that is low enough that a battery-backed RTC or CAN wake-up circuit can leave the oscillator powered without draining the backup cell overnight.

Board-fit and handling

Surface-mount only; no socket, so a reflow station is the field swap tool, not a screwdriver. It ships in a tube, not tape-and-reel, so if you are hand-placing a few units for a prototype or a repair run, that is actually easier — no need to load a feeder.