The DSC6111HL3B-060.0000T is a MEMS-based oscillator from Microchip's DSC61XXB series, delivering a 60 MHz clock output in CMOS logic levels. It is rated AEC-Q100, meaning it has passed the automotive-grade qualification for reliability under temperature cycling, ESD, and extended life stress — suitable for engine control units, ADAS sensors, or infotainment modules that see under-hood or cabin ambient conditions. The operating temperature range spans -40°C to 105°C, with frequency stability held to ±20 ppm. That stability figure is the total variation over temperature, supply, and aging — a tight enough window for a 60 MHz reference driving a CAN-FD controller or a gigabit Ethernet PHY without needing an external TCXO. Typical active current is 3 mA; in standby (power-down) the draw drops to 1.5 µA, letting the oscillator sit on a battery-backed rail in a sleep-mode system.
The land pattern is a standard 4-pad LGA — no hidden thermal pad, so reflow profile follows the JEDEC J-STD-020 for the solder paste. The MEMS die inside is sealed at the wafer level, so the part is moisture-sensitive; bake before reflow if the shelf life has been exceeded.
The part is RoHS-compliant and AEC-Q100 qualified; no additional compliance documentation (UL, IEC) is listed in the spec record.